Table | Card | RUSMARC | |
Allowed Actions: Read Download (0.6 Mb) Group: Anonymous Network: Internet |
Annotation
Приведена методика и результаты исследований влияния процессов старения на изменение прочностных характеристик клеевых соединений герметика «АН-111» и нанокомпозиции на его основе. Толщина испытываемого полимерного слоя составляла 0,2 мм. Старение полимерных материалов производилось ускоренным методом (на основе ГОСТ 9.707-81). По завершении 5, 10, 15, 20, 25, 30, 35 и 40 циклов определялась прочность клеевого соединения герметика «АН-111» и композиции на его основе при аксиальном сдвиге. Для исследования применялась разрывная машина Р-5. Показано, что стойкость к старению у нанокомпозиции на 15,4% выше, чем у ненаполненного состава. Представлены методика и результаты стендовых испытаний стойкости исследуемых полимерных составов к вибрационным нагрузкам. Амплитуда колебаний плиты составляла 1,0…1,2 мм. Толщина испытываемого полимерного слоя – 0,2 мм. После завершения испытаний на вибростенде через 5, 10, 15, 20, 25 и 30 ч образцы испытывали на прочность на разрывной машине Р-5. Установлены закономерности изменения прочности клеевых соединений в зависимости от количества циклов нагружения. Показано, что воздействие вибрационных нагрузок приводит к снижению прочностных характеристик анаэробного герметика «АН-111» на 20,4%. В свою очередь, стойкость к вибрации композиции «АН-111 + Таунит-М» на 16,5% выше, чем у ненаполненного полимерного состава.The paper presents methodology and research results of the infl uence of aging processes on the change in the strength characteristics of adhesive joints made with the AН-111 sealant and its nanocompositions. The thickness of the test polymer layer was 0.2 mm. Polymeric materials were aged using an accelerated method (based on GOST 9.707-81). Upon completion of 5,10, 15, 20, 25, 30, 35, and 40 cycles, the adhesive strength of the AН-111 sealant and its composition were determined under axial shear. For research, an explosive machine P-5 was used. It was shown that the aging resistance of the nanocomposite is 15.4% higher than that of the unfi lled composition. The authors describe the methodology and bench test results characterizing the resistance of the studied polymer compositions to vibration loads. The oscillation amplitude of the plate was 1.0…1.2 mm. The thickness of the test polymer layer amounted to 0.2 mm. After completion of the tests on the vibration bench, after 5, 10, 15, 20, 25, and 30 hours, the samples were tested for strength with a P-5 tensile testing machine. The authors have established regularities of changes in the strength of adhesive joints depending on the number of loading cycles. It has been shown that the effect of vibration loads leads to a decrease in the strength characteristics of the AН-111 anaerobic sealant by 20.4%. In turn, the vibration resistance of the AН-111 + Taunit-M composition is 16.5% higher than that of a fi ller-free (non-pigmented) polymer composition.
Usage statistics
Access count: 478
Last 30 days: 6 Detailed usage statistics |